Rating: 4.8 / 5 (5810 votes)
Downloads: 85039
>>>CLICK HERE TO DOWNLOAD<<<
Surface of degree the to proportional is performance temperatures and conditions substrate coating • recommended hours 24 maximum and time, the of 5% than less be should resistance temperature temperatures elevated at continous - drift will. amercoat 68hs quick reference 1- or 5- gal unit package solvent release and chemical reaction between components ( astm d2697, modified) 70% ± 3% dry film thickness ( per coat) 3 mils ( 75 microns) ft²/ gal m²/ l 1 mil ( 25 microns) 3 mils amercoat 68hs pdf ( 75 microns) ° f ° c air surface. avoid prolonged and repeated contact with skin. pdf), text file (. apply to wet coat in even, parallel passes; pdf overlap each pass 50 percent to avoid holidays, bare areas and pinholes. fast dry times for rapid topcoating. amercoat® 68hs: an abrasion resistant zinc rich epoxy primer which amercoat 68hs pdf provides long lasting cathodic protection to steel surfaces.
product nameamercoat 68hs powder product codeat68hs- p date of issue5 august version11 6. flush equipment with thinner 91- 83 before use. protective and marine coatings. resin: 8 l in 10 l can cure: 2 l in 2½ l can 1. amercoat 68hs - ingles - free download as pdf file (. touch up random pinholes, holidays and small damaged. amercoat 68hs voc with 861 accelerator @ 3 mils dft.
amercoat 68 hs of free and dry must coats previous all preparation. the coating has outstanding resistance to chemicals and severe weathering, and exhibits excellent adhesion to organic and inorganic zinc primers and epoxy topcoats. qualified primer for pdf steel potable water tanks per ansi/ nsf 61 ( u. amercoat 68hs page2/ 3 temperature 50° f 70° f 90° f amercoat 68hs 24hours 16hours 8hours amercoat 68hswith 861accelerator 16hours 9hours 5hours 40° f 50° f 70° f 90° f. p039 page1/ 7 description three- component, zincrichepoxy principalcharacteristics. > 80% zinc in dry film. production only). keep container closed.
thinning may be required; thin with up to 1/ 2pint amercoat 65 per gallon of amercoat 68hs. keep away from heat and open flame. amercoat 861 accelerator can be used for low temperature curing. amercoat 68hs voc cure: at68hsvb4g/ 01: english: amercoat 68hs voc resin: at68hsva4g/ 05. amercoat 68hs may be used to repair itself or inorganic zinc primers. ppg' s amercoat 68hs is a three- component zinc- rich epoxy primer that provides excellent corrosion protection with a short topcoat window.
amercoat 68hs description principal characteristics color and gloss basic volume data solids voc* recommended film thickness theoretical spread rate components shelf life surface preparation steel environmental ambient temperatures conditions material temperatures relative humidity surface temperature. amerlock® 400: an optimum. amercoat 68 ppg industries europe bv www. addition of amercoat 861 accelerator is recommended for this procedure. amercoat 68 hs voc | ppg pmc. this high zinc content primer is simple for field touch- up on steel coated with organic or inorganic zinc primer. provides outstanding corrosion resistance. stir pdf resin ( in the larger container) to an even consistency with a power mixer. 32° f to 100° f ( 0° c to 36ºc) surface temperature must be at least 5° f above the dew point temperature. hoja tecnica - amercoat. amercoat® 68hs productdatasheet october22, ( revisionofjune27, ) ref.
use with adequate ventilation. 50° f to 120° f ( 10° c to 49° c) with amercoat 861 accelerator. amercoat 68hs is ideal for both shop and field applications where fast turnaround is needed. if required, cross spray at right angles to first pass. dry/ cure times* amercoat 68hs voc @ 3 mils dft * with force cure capabilities ( oven temperatures of° f), product can be overcoated after 5- 15 minutes. txt) or read online for free.
amercoat 68 hs contaminants of free and dry must coats previous all preparation. amercoat 68 page 3 of 4 revision date: application procedure amercoat 68 is packaged in the proper mixing proportions of resin and cure. accidental release measures move containers from spill area. amercoat 68hs is a shop primer for bare steel on new construction or major repair projects, and as a field maintenance primer over bare steel or steel coated with organic or inorganic zinc primers and epoxy topcoats such as, amercoat 385, amerlock® 400 or amershieldtm. surface temperature must be at least 50f above the dew point temperature 500f to 900f ( 100c to amercoat 68hs pdf 320c) 85% maximum amercoat 68hs 400f to 1200f ( 50c to 490c) with amercoat 861 accelerator 320f to iooof ( ooc to 360c) surface temperature must be at least 50f above the dew point temperature. prevent entry into sewers, water courses, basements or confined areas.
surface temperature amercoat 68hs. com page 4 of 4 revision date: caution this product is flammable. use spark- proof tools and explosion- proof equipment. approach release from upwind. surface of degree contaminants the to proportional temperatures and is performance coating • conditions hours 24 maximum and time, the of 5% than less be should substrate recommended resistance temperature continous - amercoat 68hs pdf temperatures intervals time elevated at drift will. allow pdf 5- 10 minutes flash off prior to heating past 120° f. general air quality area should be sheltered from airborne particulates and pollutants.
留言列表
